Description
More about Loop Drive Gear Winch – Split Drum 2,000 lb. Load Capacity
This Dutton-Lainson worm gear winch is designed for horizontal pulling and vertical lifting. It has a 2,000 lb. capacity and a loop drive that allows the winch to be mounted out of reach and operated with a long shepherd’s hook and, if desired, with a variable-speed electric drill. The split reel automatically stops turning whenever cranking is stopped, locking the load in place. This winch features a powder-coated finish, zinc plated TUFFPLATE® finish on hardware. It will hold up to 82′ of 7/32″ cable, up to 59′ of 1/4″ cable, or up to 49′ of 9/32″ cable (cable sizes smaller or larger than these are not recommended). Color may vary. Made in the U.S.A.
Features/Benefits:
- Loop drive can be operated by shepard’s hook or a variable speed power drill
- The split reel automatically stops turning whenever cranking is stopped, locking load in place
- Powder-coated copper bronze finish
- Permanently lubricated bearings
- Color may vary
- Made in the USA
| Item # | Reel | Load Capacity |
Hub Diameter |
Gear Ratio |
Reel Capacity |
Wt. lbs. |
|---|---|---|---|---|---|---|
| 91130 | Reg. Drum | 1500 | 1 1/2 | 30:1 | 1/4″ x 47′ | 10 |
| 91132 | Split Drum | 1500 | 1 1/2 | 30:1 | 1/4″ x 23′ | 10 |
| 91134 | Reg. Drum | 2000 | 1 1/2 | 40:1 | 9/32″ x 45′ | 11 |
| 91136 | Split Drum | 2000 | 1 1/2 | 40:1 | 9/32″ x 22′ | 11 |
Reviews
There are no reviews yet.